{"title":"ABS \/ DWV Fittings","description":"\u003cp\u003eABS drain, waste, and vent fittings for residential and commercial plumbing rough-in — elbows, tees, couplings, closet flanges, traps, and cleanouts in Schedule 40 ABS.\u003c\/p\u003e","products":[{"product_id":"spring-loaded-access-panel","title":"Tegra Pro Spring-Loaded ABS Access Panel — Tool-Free Drywall Cover","description":"\u003cp\u003eThe Tegra Pro spring-loaded access panel solves the moment every renovation hits: you've closed up the drywall and still need a clean way back to a shutoff valve, a wiring junction, or an HVAC damper behind the wall. It pops into the rough opening by hand — no screws, no framing, no latches, no drilling — and the spring-loaded steel mechanism pulls the cover flush against the drywall face for a seam that disappears under paint. The cover is moulded from durable ABS plastic in a matte white finish that takes latex paint directly, so it blends into a ceiling or wall instead of advertising itself. Offered in an 8\" × 8\" pop-in size for tight valve and junction access and a 14\" × 14\" size for larger service openings, it gives contractors working tenant turnovers and service calls across Scarborough and the wider GTA a panel that installs in seconds and reopens just as fast the next time the valve needs attention. It carries equally well on a residential basement utility wall or a commercial corridor where inspectors expect serviceable access without a visible hardware grid. Quick to set, flush when seated, and ready for paint — a small part that keeps the wall behind it reachable for the life of the building.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"8\" × 8\"","offer_id":41611448811614,"sku":"SPRAP0808","price":14.99,"currency_code":"CAD","in_stock":true},{"title":"14\" × 14\"","offer_id":42940914368606,"sku":"SPRAP1414","price":29.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/Gemini_Generated_Image_nkn4bankn4bankn4.png?v=1782422304"},{"product_id":"lesso-1-1-2-in-abs-22-1-2-elbow-hub-x-hub-dwv-fitting","title":"LESSO ABS 22.5° Elbow — Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 22.5° elbow for the gentlest standard change of direction in an ABS DWV line — the 1\/16-bend that nudges a drain or vent a few degrees off-axis to clear a joist, stud, or another line without the commitment of a 45. Both ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid joint that holds its slight angle once the run is strapped. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\", 2\", and 3\" — the sizes that handle most fine offsets in branch and stack routing. A 22.5 is a non-pressurized DWV fitting only; test the system hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41842447351902,"sku":"324015","price":1.59,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":42488086462558,"sku":"324020","price":1.39,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41842447384670,"sku":"324030","price":5.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/9944c453-0034-4008-be44-6331aa3c99c6.png?v=1750787180"},{"product_id":"lesso-2-in-x-1-1-2-in-abs-reducing-coupling-hub-x-hub-dwv-fitting","title":"LESSO ABS Reducing Coupling — Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS reducing coupling for joining two different-size ABS DWV pipes in one solvent-welded step — the fitting that steps a 3-inch stack down to a 2-inch branch, or a 2-inch line into 1½-inch, without stacking adapters. Both ends are hub sockets sized for Schedule 40 IPS ABS, so each pipe seats to full depth before the cement sets. The coupling meets ASTM D2661 and CSA B181.1 and carries cUPC certification, the listing an inspector checks on a residential or light-commercial drain, waste, and vent rough-in across the GTA. ABS keeps the fitting light on overhead work and rigid once the run is strapped. Stocked in the three reductions that cover most kitchen, bath, and stack transitions — 2×1½\", 3×1½\", and 3×2\" — a low-cost part you reach for whenever pipe sizes change mid-run.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"2\" x 1 1\/2\"","offer_id":41842446368862,"sku":"102251","price":1.89,"currency_code":"CAD","in_stock":true},{"title":"3\" x 1 1\/2\"","offer_id":41842446401630,"sku":"102337","price":4.59,"currency_code":"CAD","in_stock":true},{"title":"3\" x 2\"","offer_id":41842446434398,"sku":"102338","price":4.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/0ba65477-2a82-4df6-a845-3bfcc03d9506.png?v=1751484592"},{"product_id":"lesso-2-in-x-1-1-2-in-abs-flush-bushing-spg-x-hub","title":"LESSO ABS Flush Bushing — Spigot × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS flush bushing for reducing pipe size inside an existing fitting hub — the spigot end carries the same outside diameter as pipe, so it drops straight into a hub and saves the space a separate reducing coupling would need. It's built for non-pressurized ABS drain, waste, and vent work and meets ASTM D2661 and CSA B181.1 with cUPC certification, the listing an inspector checks on a residential or light-commercial rough-in across the GTA. One-step black ABS cement bonds the joint with no primer, and the low-profile body keeps the reduction tight where a coupling won't fit. Stocked in 2×1½\", 3×1½\", and 3×2\" — the reductions that come up most often when a branch or fixture line meets a larger fitting mid-run.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"2\" x 1-1\/2\"","offer_id":41842415632478,"sku":"107251","price":0.99,"currency_code":"CAD","in_stock":true},{"title":"3\" x 1-1\/2\"","offer_id":41842415665246,"sku":"107337","price":4.19,"currency_code":"CAD","in_stock":true},{"title":"3\" x 2\"","offer_id":41842415698014,"sku":"107338","price":4.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/65893bfc-69cc-403e-aafd-5570a0bcf465_ccacfb65-7572-4b89-8444-eedd6a85ef0f.png?v=1760998124"},{"product_id":"lesso-1-1-2-in-abs-female-adapter-hub-x-fipt","title":"LESSO ABS Female Adapter — 1½\" Hub × FIPT DWV, cUPC Certified","description":"\u003cp\u003eABS female adapter for making a threaded transition off an ABS DWV line — the hub end solvent-welds to Schedule 40 IPS ABS, and the FIPT (female NPT) end accepts a matching male pipe thread, so you can tie into a threaded trap arm, cleanout, or appliance fitting without leaving solvent-weld ABS. It's the simple hub-to-thread step used wherever a run has to meet a threaded component. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\" for standard drain and vent transitions. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41825258504286,"sku":"101015","price":1.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/968d9344-4857-49db-84c7-ad788bb3c9ac.png?v=1751123931"},{"product_id":"lesso-1-1-2-in-abs-double-sanitary-tee-hub","title":"LESSO ABS Double Sanitary Tee — All-Hub DWV, cUPC Certified","description":"\u003cp\u003eABS double sanitary tee for tying two opposing fixture branches into a single vertical stack — the back-to-back junction used where two fixtures, like a pair of lavatories or a back-to-back bath group, drain into the same stack. Each branch inlet enters with a curved sanitary sweep that turns flow downward, so both lines drain cleanly without catching at the joint. All four ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed stack. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\" for paired-fixture branch work. Double sanitary tees are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41825259126878,"sku":"428015","price":5.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/c2da9b83-8688-425e-9422-a2f6a6e3e934.png?v=1751467793"},{"product_id":"lesso-1-1-2-in-x-1-1-2-in-x-1-2-in-abs-dishwasher-wye-hub-x-hub-x-barb","title":"LESSO ABS Dishwasher Wye — 1½\" Hub × Hub × ½\" Barb DWV","description":"\u003cp\u003eABS dishwasher wye for tying a dishwasher drain hose into the sink waste line under the counter — the compact fitting that solvent-welds into a 1½\" ABS DWV run and presents a ½\" barbed outlet for the appliance hose. The two hub ends bond to ABS pipe; the barb grips the flexible drain hose and holds it with a clamp. It's built for non-pressurized DWV service and meets ASTM D2661 and CSA B181.1, with the cUPC and NSF\/ANSI 14 listings an inspector checks across the GTA. Many jurisdictions require a high loop or air gap on a dishwasher drain — most appliance makers specify roughly a 32\" high loop where no air gap is used, so check local code before final connection. A clean, code-friendly way to branch a dishwasher into the sink drain without cutting in a separate tee and adapter.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41828270735454,"sku":"601209","price":4.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/614cb7d6-28bc-45d7-8ae5-93c37edf2eb9.png?v=1751307284"},{"product_id":"lesso-abs-4-in-x-3-in-adjustable-closet-flange-spg-connection","title":"LESSO ABS Closet Flange — 4×3 Spigot, Adjustable Ring DWV, cUPC","description":"\u003cp\u003eABS closet flange with a spigot outlet for setting a toilet over an ABS DWV stack — the spigot end carries the same outside diameter as pipe and inserts into a 3\" fitting hub, so it solvent-welds in compact and seats the flange flush to the finished floor. The adjustable bolt ring rotates after the flange is cemented, letting you line the closet bolts up square to the wall before you set the bowl. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. The wax or rubber seal and closet bolts are sold separately. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41828305928286,"sku":"812P422","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/83cca54b-a587-4981-afc6-3db935662660.png?v=1751463295"},{"product_id":"lesso-1-1-2-in-abs-45-double-wye-all-hub-dwv-fitting","title":"LESSO ABS 45° Double Wye — All-Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° double wye for bringing two branches into a main on a single fitting — two Y-branches back to back, each entering at a gentle 45° so both lines drain with the flow instead of across it. All-hub sockets solvent-weld to Schedule 40 IPS ABS for a rigid, sealed junction. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. A double wye is the clean way to tie two fixtures or branch lines into one run without stacking two separate wyes. Stocked in 1½\" for paired branch work. Double wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41828765925470,"sku":"611015","price":5.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/463c1728-91be-4385-8a3a-5555789f7e17.png?v=1751462226"},{"product_id":"lesso-4-in-x-3-in-abs-closet-flange-with-adjustable-plastic-ring-hub","title":"LESSO ABS Closet Flange — 4×3 Hub, Adjustable Ring DWV, cUPC","description":"\u003cp\u003eABS closet flange with a hub socket for setting a toilet over an ABS DWV stack — the hub fits over the pipe end and solvent-welds down, anchoring the flange to the finished floor and tying the bowl into the drain. The adjustable plastic ring rotates after the flange is cemented, so you can line the closet bolts up square to the wall before the bowl goes down. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. The wax or rubber seal and closet bolts are sold separately. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41833541730398,"sku":"810P422","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/6a12515c-148e-469d-8b22-2274a1be21e5.png?v=1751471143"},{"product_id":"lesso-4-in-x-3-in-abs-adjustable-offset-closet-flange-hub-connection","title":"LESSO ABS Offset Closet Flange — 4×3 Hub, 1½\" Offset DWV, cUPC","description":"\u003cp\u003eABS offset closet flange for re-centring a toilet when the rough-in doesn't land where the bowl needs to sit — the body shifts the flange face up to about 1½\" laterally from the drain, recovering an install that would otherwise mean tearing up the floor to move the pipe. The hub solvent-welds to the ABS stack, and the 360° rotating bolt ring lets you square the closet bolts to the wall after the flange is set. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. The wax or rubber seal and closet bolts are sold separately. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41833638494302,"sku":"820422","price":13.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/0259f236-3ca3-468e-b652-f3398ac5ed52.png?v=1751472210"},{"product_id":"lesso-1-1-2-in-abs-90-street-elbow-hub-x-spg-dwv-fitting","title":"LESSO ABS 90° Street Elbow — Spigot × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 90° street elbow for a tight direction change that connects straight into another fitting — the spigot end carries pipe outside diameter and inserts into a fitting hub, so you skip a coupling and save space in a crowded rough-in. The opposite end is a hub that accepts pipe, solvent-welded for a rigid joint sized to Schedule 40 IPS ABS. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial DWV rough-in across the GTA. Stocked in 1½\", 2\", and 3\" — the sizes that come up most where a fixture or branch ties straight into a fitting. Street pattern is non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844201324638,"sku":"302015S","price":0.99,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844201357406,"sku":"302020S","price":2.99,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844201390174,"sku":"302030S","price":5.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/af9b1df0-44b3-458a-bca0-673b71fe0fdd.png?v=1751472520"},{"product_id":"lesso-1-1-2-in-abs-90-elbow-short-turn-hub-x-hub-dwv-fitting","title":"LESSO ABS 90° Elbow — Short-Turn Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 90° short-turn elbow for a tight, clean change of direction in an ABS DWV line — the fitting that turns a drain or vent the full quarter without the wide sweep of a long-turn pattern, so it fits where space is tight behind a wall or under a fixture. Both ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid joint that holds its angle once the run is strapped. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\", 2\", and 3\" — the sizes that cover most fixture drops, branch turns, and vent stacks. A short-turn 90 is a non-pressurized DWV fitting only; test the system hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844200505438,"sku":"300015S","price":0.99,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844200538206,"sku":"300020S","price":2.19,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41907901071454,"sku":"300030S","price":5.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/770e90f5-74c9-4275-bc3a-4b15a1b0eb12.png?v=1751473458"},{"product_id":"lesso-2-in-abs-45-elbow-hub-x-hub-dwv-fitting","title":"LESSO ABS 45° Elbow — Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° elbow for a gentle change of direction in an ABS DWV line — the half-quarter bend (a 1\/8-bend in trade shorthand) that eases a drain or vent around an obstacle without the abrupt turn of a 90. Both ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid joint that keeps flow moving on the drainage side. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\", 2\", and 3\" — the sizes that handle most offsets and angle changes in branch and stack work. A 45 is a non-pressurized DWV fitting only; test the system hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844188938334,"sku":"321015S","price":0.99,"currency_code":"CAD","in_stock":false},{"title":"2\"","offer_id":41844188971102,"sku":"321020S","price":1.99,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844189003870,"sku":"321030S","price":4.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/1411031b-9b3a-4d66-83ba-6dae80283bc5.png?v=1751475062"},{"product_id":"lesso-1-1-2-in-abs-female-trap-adapter-hub-x-fipt-nut-not-included","title":"LESSO ABS Female Trap Adapter — 1½\" Hub × FIPT DWV, cUPC Certified","description":"\u003cp\u003eABS female trap adapter for a threaded transition where a trap arm or drain component meets an ABS line — the hub solvent-welds to Schedule 40 IPS ABS, and the FIPT (female NPT) end takes a male pipe thread. This is the threaded-style adapter: no nut, no washer, it joins to threaded pipe rather than a tubular tailpiece. Reach for it when the connection on the other side is male pipe thread; for a slip-joint connection to a P-trap tailpiece, use the slip-joint trap adapter instead. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\". DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41834129260638,"sku":"104015","price":1.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/2b80d642-febc-4a5a-aa35-6477399460ac.png?v=1751478823"},{"product_id":"lesso-1-1-2-in-abs-female-trap-adapter-with-plastic-nut-hub-x-fipt","title":"LESSO ABS Trap Adapter — Hub × Slip-Joint with Nut DWV, cUPC Certified","description":"\u003cp\u003eABS trap adapter that takes a drain run from rough-in to finish under a sink — the hub solvent-welds to the 1½\" ABS wall stub, and the threaded spigot accepts the included plastic slip nut and washer to seal onto a P-trap or tailpiece. That slip-joint outlet is the connection that lets you tighten by hand onto a chrome, PVC, or brass tubular tailpiece and break it apart again for service without tools or cement. It's the standard way to land a finished trap onto an ABS rough-in. A LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings. Stocked in 1½\" and a 1½\"×1¼\" reducing size for lavatory tailpieces. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":42429518544990,"sku":"104P015","price":1.79,"currency_code":"CAD","in_stock":true},{"title":"1 1\/2\" x 1 1\/4\"","offer_id":42429518577758,"sku":"104P212","price":1.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/980381ab-f0b4-44c9-9266-7d81c1f16780_eeac19f5-2b79-4fb4-a07a-b2fc70e267fb.png?v=1751483344"},{"product_id":"lesso-1-1-2-in-abs-all-hub-coupling","title":"LESSO ABS Hub Coupling — Hub × Hub DWV Connector, cUPC Certified","description":"\u003cp\u003eABS hub coupling for joining two same-size ABS DWV pipes in a clean, solvent-welded run — the everyday connector that extends a line or repairs a cut without a transition fitting. Both ends are hub sockets sized for Schedule 40 IPS ABS, so the pipe seats fully before the cement sets and the joint reads straight. The coupling meets ASTM D2661 and CSA B181.1 and carries cUPC certification, which is what an inspector looks for on a residential or light-commercial drain, waste, and vent rough-in across the GTA. ABS stays light enough to handle overhead on a ladder and rigid enough to hold alignment once the run is supported. Stocked in 1½\", 2\", and 3\" for the sizes that cover most sink, tub, and branch-line work — a low-cost fitting you buy by the handful and never think about again because it simply holds.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41842435063902,"sku":"1000015","price":0.69,"currency_code":"CAD","in_stock":false},{"title":"2\"","offer_id":41842435096670,"sku":"1000020","price":1.09,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41842435129438,"sku":"1000030","price":2.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/6f61259e-4115-42bb-a480-03473f2a2469.png?v=1750723568"},{"product_id":"lesso-1-1-2-in-abs-cap-hub","title":"LESSO ABS Cap — Hub DWV Pipe End Closure, cUPC Certified","description":"\u003cp\u003eABS cap for sealing the end of an ABS DWV run — the hub socket slides over the pipe end and solvent-welds to a permanent, watertight closure, the clean way to terminate a stubbed-out line or close off a future connection point. Unlike a threaded plug that screws into a fitting, this cap fits over pipe, so it's what you reach for to cap a length of pipe itself. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\", 2\", and 3\" for the common stub and termination sizes. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844219674718,"sku":"116015","price":1.39,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844219707486,"sku":"116020","price":1.69,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844219740254,"sku":"116030","price":2.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/9b889e94-ef23-4f4d-93c1-2d5d9ab99b62.png?v=1751486073"},{"product_id":"lesso-1-1-2-in-abs-45-street-elbow-short-turn-spg-x-hub-dwv-fitting","title":"LESSO ABS 45° Street Elbow — Spigot × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° street elbow for a gentle offset that ties straight into another fitting — the spigot end carries pipe outside diameter and inserts into a fitting hub, so a 1\/8-bend connects directly off a trap, tee, or another elbow with no coupling between. The opposite hub accepts pipe, solvent-welded to Schedule 40 IPS ABS for a rigid joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial DWV rough-in across the GTA. Stocked in 1½\", 2\", and 3\" — the sizes that handle most tight offsets where parts meet directly. Street pattern is non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844172652638,"sku":"323015S","price":0.99,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844172685406,"sku":"323020S","price":1.89,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844172718174,"sku":"323030S","price":4.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/e791bee2-bfe1-401c-b991-26b3dcd9c880.png?v=1751474446"},{"product_id":"lesso-1-1-2-in-abs-sanitary-tee-hub-x-hub-x-hub","title":"LESSO ABS Sanitary Tee — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS sanitary tee for tying a horizontal fixture branch into a vertical drain or vent stack — the workhorse junction behind a sink, tub, or lavatory where a branch line meets the stack. The branch inlet enters with a curved sanitary sweep that turns flow downward into the stack, so waste keeps moving and solids don't catch at the joint the way they would on a square vent-tee inlet. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½\" and 2\" — the sizes that cover most fixture and branch tie-ins. Sanitary tees are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41883790573662,"sku":"400015L","price":1.89,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41883790606430,"sku":"400020L","price":3.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/b89f74ab-159c-4693-9eb8-c8bb94dba164_24c7cdc9-ae52-4d4f-ba95-2bb2ba6fa33a.png?v=1751496654"},{"product_id":"lesso-2-in-x-1-1-2-in-x-2-in-abs-reducing-sanitary-tee-hub-x-hub-x-hub","title":"LESSO ABS Reducing Sanitary Tee — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS reducing sanitary tee for tying a smaller fixture branch into a larger drain or vent stack — the junction that lets a 1½\" or 2\" branch meet a 2\" or 3\" stack without stacking a separate bushing first. The branch inlet enters with a curved sanitary sweep that turns flow downward into the stack, so waste keeps moving where pipe sizes change. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 2×2×1½\", 3×3×1½\", and 3×3×2\" — the reductions that cover most fixture-to-stack tie-ins. Sanitary tees are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"2\" x 2\" x 1 1\/2\"","offer_id":41844214431838,"sku":"401251L","price":3.89,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 1 1\/2\"","offer_id":41989860589662,"sku":"401337L","price":5.39,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 2\"","offer_id":41844214464606,"sku":"401338L","price":5.39,"currency_code":"CAD","in_stock":true},{"title":"2\" x 1-1\/2\" x 1-1\/2\"","offer_id":42945781923934,"sku":"401241L","price":4.59,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/b89f74ab-159c-4693-9eb8-c8bb94dba164_24c7cdc9-ae52-4d4f-ba95-2bb2ba6fa33a.png?v=1751496654"},{"product_id":"lesso-1-1-2-in-abs-45-wye-hub-x-hub-x-hub","title":"LESSO ABS 45° Wye — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° wye for a smooth branch tie-in on an ABS DWV line — the Y-shaped junction that brings a branch into the main at a gentle 45° instead of a square 90°, so waste slides in with the flow rather than crashing across it. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. The 45° sweep is the preferred branch pattern on the drainage side because it keeps solids moving and resists clogs. Stocked in 1½\", 2\", and 3\" — the sizes that cover most branch and cleanout tie-ins. Wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844189560926,"sku":"600015L","price":2.29,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844189593694,"sku":"600020L","price":3.89,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844189626462,"sku":"600030L","price":8.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/afcd4460-6884-40d3-8c8c-f4b620ae753c.png?v=1751497393"},{"product_id":"lesso-2-in-x-2-in-x-1-1-2-in-abs-reducing-sanitary-tee-hub-x-hub-x-hub","title":"LESSO ABS 45° Reducing Wye — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° reducing wye for a smooth branch tie-in that also steps down a size — the Y-junction that brings a smaller branch into a larger main at a gentle 45°, so you reduce and branch in one fitting instead of stacking a wye and a bushing. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. The 45° sweep keeps flow moving through the size change, which is why it's preferred over a square tee on the drainage side. Stocked in 2×2×1½\", 3×3×1½\", and 3×3×2\" — the reductions that cover most branch tie-ins. Wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"2\" x 2\" x 1 1\/2\"","offer_id":41844214857822,"sku":"601251L","price":4.09,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 1 1\/2\"","offer_id":41844214890590,"sku":"601337L","price":6.79,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 2\"","offer_id":41844214923358,"sku":"601338L","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/afcd4460-6884-40d3-8c8c-f4b620ae753c.png?v=1751497393"},{"product_id":"lesso-4-in-x-3-in-abs-closet-flange-hub-connection","title":"LESSO ABS Closet Flange — 4×3 Hub DWV Toilet Flange, cUPC","description":"\u003cp\u003eABS closet flange for the standard toilet rough-in — the hub socket fits over the ABS DWV pipe and solvent-welds down, anchoring the bowl to the finished floor and tying it into the drain in one fitting. It's the plain workhorse flange: no offset, no test plug, just a rigid 4×3 connection set square to the floor. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. The wax or rubber seal and closet bolts are sold separately. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41834942890078,"sku":"800422L","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/7b395048-80b2-4183-a880-efb441252bf2.png?v=1751499634"},{"product_id":"abs-hinged-access-panel-wall-ceiling-utility-cover-6in-x-6in-to-12in-x-12in","title":"Tegra Pro Hinged ABS Access Panel — Paintable Wall \u0026 Ceiling Cover","description":"\u003cp\u003eThe Tegra Pro ABS hinged access panel gives you a swing-open door back to the valves, junctions, and low-voltage runs you'll need again — not a cover you have to pry off and refit every time. The hinged door surface-mounts over the opening and swings clear on its own frame, so a shutoff or a cleanout stays reachable in one motion without removing the panel from the wall. It's moulded from durable ABS plastic in a matte white finish that takes latex paint directly, letting the frame disappear into a finished wall or ceiling instead of standing out as builder hardware. Offered in 6\" × 6\" for valve and junction access, 10\" × 10\" for mid-size service points, and 12\" × 12\" for larger mechanical openings, it covers the panel sizes contractors reach for most on tenant turnovers and service calls across Scarborough and the wider GTA. The frame mounts flush to drywall, plaster, or tile, and the swing door keeps the access point serviceable for plumbing, electrical, and HVAC long after the wall is closed. A clean, paintable door that stays put and opens when you need it — the difference between a real access point and a patched hole.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"6\" x 6\"","offer_id":41877109014622,"sku":"HNGAP0606","price":10.99,"currency_code":"CAD","in_stock":true},{"title":"10\" x 10\"","offer_id":41877109047390,"sku":"HNGAP1010","price":17.99,"currency_code":"CAD","in_stock":true},{"title":"12\" x 12\"","offer_id":41877109080158,"sku":"HNGAP1212","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/a0bde3e6-eea6-4302-8c24-5ad4be025c8f.png?v=1753198132"},{"product_id":"lesso-abs-closet-flange-with-knockout-test-plug-4-x-3-adjustable-toilet-floor-flange-schedule-40-dwv-rough-in","title":"LESSO ABS Closet Flange with Knockout Test Plug — 4×3 DWV, cUPC","description":"\u003cp\u003eABS closet flange with a moulded-in knockout test plug — the rough-in flange that seals the drain line for pressure testing the moment it's set, no test cap or balloon needed. The integrated plug holds an airtight seal through inspection and blocks sewer gas during construction; once the system passes, a hammer strike along the scored perimeter knocks the center out cleanly, leaving a standard opening for the toilet. The hub fits over 3\" pipe or inside 4\" pipe for either rough-in, and the slotted bolt holes let you align the closet bolts after gluing. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF\/ANSI 14 and cUPC listings. The wax or rubber seal and closet bolts are sold separately. DWV service only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":42429612425310,"sku":"8002422CL","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/ChatGPTImageJan28_2026_12_45_53PM.png?v=1769622380"}],"url":"https:\/\/gdbuildingsupply.com\/collections\/abs-dwv-fittings.oembed","provider":"Good Day Building Supply Inc.","version":"1.0","type":"link"}