{"title":"ABS Wyes","description":"\u003cp\u003eABS DWV wyes for smooth branch tie-ins — 45°, double, reducing, and dishwasher wyes that bring a branch into the main with the flow.\u003c\/p\u003e","products":[{"product_id":"lesso-1-1-2-in-x-1-1-2-in-x-1-2-in-abs-dishwasher-wye-hub-x-hub-x-barb","title":"LESSO ABS Dishwasher Wye — 1½\" Hub × Hub × ½\" Barb DWV","description":"\u003cp\u003eABS dishwasher wye for tying a dishwasher drain hose into the sink waste line under the counter — the compact fitting that solvent-welds into a 1½\" ABS DWV run and presents a ½\" barbed outlet for the appliance hose. The two hub ends bond to ABS pipe; the barb grips the flexible drain hose and holds it with a clamp. It's built for non-pressurized DWV service and meets ASTM D2661 and CSA B181.1, with the cUPC and NSF\/ANSI 14 listings an inspector checks across the GTA. Many jurisdictions require a high loop or air gap on a dishwasher drain — most appliance makers specify roughly a 32\" high loop where no air gap is used, so check local code before final connection. A clean, code-friendly way to branch a dishwasher into the sink drain without cutting in a separate tee and adapter.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41828270735454,"sku":"601209","price":4.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/614cb7d6-28bc-45d7-8ae5-93c37edf2eb9.png?v=1751307284"},{"product_id":"lesso-1-1-2-in-abs-45-double-wye-all-hub-dwv-fitting","title":"LESSO ABS 45° Double Wye — All-Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° double wye for bringing two branches into a main on a single fitting — two Y-branches back to back, each entering at a gentle 45° so both lines drain with the flow instead of across it. All-hub sockets solvent-weld to Schedule 40 IPS ABS for a rigid, sealed junction. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. A double wye is the clean way to tie two fixtures or branch lines into one run without stacking two separate wyes. Stocked in 1½\" for paired branch work. Double wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"Default Title","offer_id":41828765925470,"sku":"611015","price":5.39,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/463c1728-91be-4385-8a3a-5555789f7e17.png?v=1751462226"},{"product_id":"lesso-1-1-2-in-abs-45-wye-hub-x-hub-x-hub","title":"LESSO ABS 45° Wye — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° wye for a smooth branch tie-in on an ABS DWV line — the Y-shaped junction that brings a branch into the main at a gentle 45° instead of a square 90°, so waste slides in with the flow rather than crashing across it. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. The 45° sweep is the preferred branch pattern on the drainage side because it keeps solids moving and resists clogs. Stocked in 1½\", 2\", and 3\" — the sizes that cover most branch and cleanout tie-ins. Wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"1 1\/2\"","offer_id":41844189560926,"sku":"600015L","price":2.29,"currency_code":"CAD","in_stock":true},{"title":"2\"","offer_id":41844189593694,"sku":"600020L","price":3.89,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":41844189626462,"sku":"600030L","price":8.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/afcd4460-6884-40d3-8c8c-f4b620ae753c.png?v=1751497393"},{"product_id":"lesso-2-in-x-2-in-x-1-1-2-in-abs-reducing-sanitary-tee-hub-x-hub-x-hub","title":"LESSO ABS 45° Reducing Wye — Hub × Hub × Hub DWV, cUPC Certified","description":"\u003cp\u003eABS 45° reducing wye for a smooth branch tie-in that also steps down a size — the Y-junction that brings a smaller branch into a larger main at a gentle 45°, so you reduce and branch in one fitting instead of stacking a wye and a bushing. All three ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It meets ASTM D2661 and CSA B181.1 and carries cUPC and NSF\/ANSI 14 certification, the listings an inspector checks on a residential or light-commercial rough-in across the GTA. The 45° sweep keeps flow moving through the size change, which is why it's preferred over a square tee on the drainage side. Stocked in 2×2×1½\", 3×3×1½\", and 3×3×2\" — the reductions that cover most branch tie-ins. Wyes are non-pressurized DWV only; test hydrostatically, never with compressed air or gas.\u003c\/p\u003e","brand":"LESSO","offers":[{"title":"2\" x 2\" x 1 1\/2\"","offer_id":41844214857822,"sku":"601251L","price":4.09,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 1 1\/2\"","offer_id":41844214890590,"sku":"601337L","price":6.79,"currency_code":"CAD","in_stock":true},{"title":"3\" x 3\" x 2\"","offer_id":41844214923358,"sku":"601338L","price":6.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/afcd4460-6884-40d3-8c8c-f4b620ae753c.png?v=1751497393"}],"url":"https:\/\/gdbuildingsupply.com\/collections\/abs-wyes.oembed","provider":"Good Day Building Supply Inc.","version":"1.0","type":"link"}