{"title":"Device Boxes","description":"\u003cp\u003eSteel and gangable device boxes, junction boxes, and ceiling boxes for rough-in wiring — single-gang through four-gang, plus 4-square and octagon boxes.\u003c\/p\u003e","products":[{"product_id":"1-gangable-steel-electrical-box-12-5-cu-in-etl-certified-1-1mm-thick","title":"Nodexa 1-Gang Gangable Device Box — 3″ × 2″ × 2-1\/2″, Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 1-Gang Gangable Device Box is the steel rough-in box built for electricians who plan for change. Formed from 1.1mm galvanized steel — heavier wall than the import-grade boxes that crush under a stud gun — it takes a switch, receptacle, or dimmer in a true 12.5 cubic inches of fill. The gangable design is the point: pull the removable side plate and gang two, three, or more boxes into a continuous multi-device run without swapping to a larger box or re-cutting the opening. Standard 1\/2-inch knockouts land conduit or NMD cable on any side, and the 2-1\/2-inch depth leaves room to fold conductors cleanly behind the device. ETL Listed under 4009580 for residential and commercial framing, it mounts as new work to the stud or adapts to old work with the right supports. It's a NorthLine Signature electrical part: stocked deep, priced for the contractor buying by the sleeve, and built to the spec the job actually needs.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41885676994654,"sku":"1104-LH1","price":2.49,"currency_code":"CAD","in_stock":true},{"title":"50 Pack","offer_id":41885677027422,"sku":"1104-LH","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/c9bf042d-bed3-4841-90c4-e0fcba12be52.png?v=1753537086"},{"product_id":"1-gang-steel-electrical-box-12-5-cu-in-etl-certified-1-1mm-thick","title":"Nodexa 1-Gang Device Box — 3″ × 2″ × 2-1\/2″, Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 1-Gang Device Box is the fixed-wall counterpart to the gangable box — a single-gang steel enclosure with solid, non-removable sides for installers who want one box, set once, with no moving parts to work loose. Drawn from 1.1mm galvanized steel, it holds a true 12.5 cubic inches, enough room for a GFCI, a dimmer, or a deep smart switch with its conductors folded behind. The sealed sidewalls give it more rigidity than a gangable box — it won't flex or twist when you drive the mounting screws — which makes it the box of choice for surface-mount work, exposed conduit, and anywhere the box takes abuse. Standard 1\/2-inch knockouts open on multiple faces for conduit or NMD cable, and it accepts any standard 1-gang cover or device plate. ETL Listed under 4009580 for residential and commercial installation. It's a NorthLine Signature electrical part: stocked deep, priced for the contractor buying by the sleeve, built for the rough-in that doesn't need to gang.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41885725851742,"sku":"W786895","price":2.49,"currency_code":"CAD","in_stock":true},{"title":"50 Pack","offer_id":41885725884510,"sku":"S328507","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/0c73d472-5acd-4d4b-8c9e-f9f270d6e285.png?v=1753482054"},{"product_id":"2-gang-steel-device-box-3-3-2-galvanized-etl-listed","title":"Nodexa 2-Gang Device Box — 3″ × 3-3\/4″ × 2-1\/2″, Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 2-Gang Device Box puts two devices side by side in one rigid steel enclosure — the box for a switch-plus-receptacle, a pair of switches, or any spot where a single gang won't carry the load. Drawn from 1.1mm galvanized steel at 3 by 3-3\/4 inches and 2-1\/2 deep, it holds 25 cubic inches: real room for the extra conductors and pigtails a two-device box demands without crowding the makeup. The solid one-piece body stays square as you drive the screws, so the two devices and the cover plate line up clean — the detail that separates a tidy finish from a crooked one. Standard 1\/2-inch knockouts open on the top, bottom, and back for conduit or NMD cable, and it accepts any standard 2-gang cover or device plate. ETL Listed under 4009580 for residential and commercial installation. It's a NorthLine Signature electrical part: stocked deep, priced for the contractor buying by the sleeve, built to keep a two-gang run square and simple.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41889006518366,"sku":"2104-LLE21","price":3.99,"currency_code":"CAD","in_stock":true},{"title":"30 Pack","offer_id":41889006551134,"sku":"2104-LLE2","price":84.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/239fbc3c-c80a-4d7f-ac03-5c65e5ce7f29.png?v=1753543366"},{"product_id":"3-gang-steel-device-box-3-5-2-galvanized-etl-listed","title":"Nodexa 3-Gang Device Box — 3″ × 5-1\/2″ × 2-1\/2″, Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 3-Gang Device Box carries three devices in one rigid steel enclosure — a bank of switches, a row of dimmers, or any three-device control cluster that has to land flush and aligned. Drawn from 1.1mm galvanized steel at 3 by 5-1\/2 inches and 2-1\/2 deep, it holds 37.5 cubic inches, the volume a triple makeup needs once you account for the neutral and ground bundles a 3-way or 4-way switching run pulls together. The solid one-piece body is the reason to reach for it over a ganged assembly: it stays dead square as you set it, so three devices and a 3-gang plate sit flat against the drywall instead of bowing at the seams. Standard 1\/2-inch knockouts open for conduit or NMD cable, and it accepts any standard 3-gang cover. ETL Listed under 4009580 for residential and commercial installation. It's a NorthLine Signature electrical part: stocked deep, priced for the contractor running banks of switches by the sleeve, built to keep a three-gang wall straight.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41889013203038,"sku":"2104-LLE31","price":5.49,"currency_code":"CAD","in_stock":true},{"title":"20 Pack","offer_id":41889013235806,"sku":"2104-LLE3","price":119.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/e370572c-ab09-4d56-bf9d-1dfb547be8b6.png?v=1753544878"},{"product_id":"4-gang-steel-device-box-3-7-2-galvanized-etl-listed","title":"Nodexa 4-Gang Device Box — 3″ × 7-3\/8″ × 2-1\/2″, Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 4-Gang Device Box carries four devices in one rigid steel enclosure — the box for a master switch wall, a bank of dimmers, or a lighting-control cluster at a main entry. Drawn from 1.1mm galvanized steel at 3 by 7-3\/8 inches and 2-1\/2 deep, it holds 50 cubic inches, the volume four devices need once the line, load, neutral, and ground conductors of a multi-switch makeup come together. The solid one-piece body is what keeps a four-wide run honest: it stays flat and true as you set it, so four devices and a 4-gang plate sit square against the drywall instead of bowing across a 7-inch span. Standard 1\/2-inch concentric knockouts open for conduit or NMD cable from any direction, and it accepts any standard 4-gang cover. ETL Listed under 4009580 for residential and commercial installation. It's a NorthLine Signature electrical part: stocked deep, priced for the contractor wiring master-switch walls by the sleeve, built to keep a four-gang bank straight.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41889015955550,"sku":"2104-LLE41","price":6.49,"currency_code":"CAD","in_stock":true},{"title":"10 Pack","offer_id":41889015988318,"sku":"2104-LLE4","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/4c285219-5c8d-4c0a-86b9-23077abc2efa_93edb3f1-1fc8-4230-808c-fd990fa3ffee.png?v=1753546147"},{"product_id":"nodexa-4-square-box-1900-galvanized-steel-etl","title":"Nodexa 4″ Square Box (1900) — 4″ × 4″ × 2″, 30 cu. in. Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 4″ Square Box — the \"1900\" every electrician already knows — is the high-volume junction that ties a rough-in together, splicing multiple circuits where a single-gang box would choke. Drawn from 1.1mm galvanized steel at a full 4 by 4 inches and 2 inches deep, it carries 30 cubic inches: real room for the wire nuts, pigtails, and crossing conduit runs a busy makeup pulls into one place, without the crowding that fails a box-fill check. The one-piece steel body gives conduit a rigid, crush-resistant anchor and holds grounding continuity that plastic can't match under a stud gun. Concentric 1\/2″ and 3\/4″ knockouts open on every face, so cable and conduit land from any direction, and a mud ring converts it from a pure junction box into a flush device mount for a switch or receptacle on a Scarborough infill build or a GTA commercial fit-out. ETL Listed under 4009580 for code-compliant residential and commercial wiring, it's a NorthLine Signature electrical part: stocked deep, priced for the contractor buying by the sleeve, built to be the box everything else lands in.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41889017593950,"sku":"72171-K1","price":4.49,"currency_code":"CAD","in_stock":true},{"title":"40 Pack","offer_id":41889017626718,"sku":"72171-K","price":114.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/dc375960-90bf-4336-ab3a-b5f73cef6729.png?v=1753546913"},{"product_id":"4-octagon-junction-box-galvanized-steel-15-5-cu-in-etl-listed","title":"Nodexa 4″ Octagon Ceiling Box — 1-1\/2″ Deep (15.5 cu. in.), Galvanized Steel (ETL)","description":"\u003cp\u003eThe Nodexa 4″ Octagon Ceiling Box is the anchor a light fixture, sconce, or smoke detector actually hangs from — the round-canopy standard that every ceiling rough-in comes back to. Drawn from 1.1mm galvanized steel at a 4-inch octagon profile and 1-1\/2 inches deep, it holds 15.5 cubic inches: enough room for the splices a fixture whip and a switched-line makeup bring together without crowding the box. The drawn one-piece body gives the fixture a rigid steel base to thread into, rated to carry static lighting loads up to 50 lbs where ganged or plastic boxes flex — though it is not fan-rated, and a ceiling fan needs a fan-rated box instead. Eight 1\/2-inch knockouts open on the sides and bottom for cable or conduit entry from any direction, and the box drops into a standard joist bay or mounts to a bar hanger for centered fixture placement on a Scarborough infill ceiling or a GTA renovation. ETL Listed under 4009580 for code-compliant residential and commercial wiring, it's a NorthLine Signature electrical part: stocked deep, priced for the contractor setting fixture boxes by the sleeve, built to give every canopy a true place to land.\u003c\/p\u003e","brand":"NorthLine Signature","offers":[{"title":"1 Pack","offer_id":41889021919326,"sku":"54151-L1","price":3.49,"currency_code":"CAD","in_stock":true},{"title":"50 Pack","offer_id":41889021952094,"sku":"54151-L","price":80.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/65de0f38-040a-487f-b781-9f480226e7da.png?v=1753547406"}],"url":"https:\/\/gdbuildingsupply.com\/collections\/electrical-device-boxes.oembed","provider":"Good Day Building Supply Inc.","version":"1.0","type":"link"}