{"title":"Rings, Clamps \u0026 Supports","description":"\u003cp\u003eThe hardware that closes and secures a PEX run — copper crimp rings, stainless steel cinch clamps, and nail-in J-clamp pipe supports for PEX, copper, and CPVC.\u003c\/p\u003e","products":[{"product_id":"j-clamp-with-nail","title":"1\/2″ J-Clamp Nail-In Pipe Support — 100-Pack for PEX, Copper \u0026 CPVC","description":"\u003cp\u003ePipe that isn't fastened rattles, and a line that rattles eventually works a crimp joint loose. A J-clamp ends that in one swing: the nail comes pre-loaded in the stem, so you hook the clamp over the tubing, set it against the stud, and drive it home without ever fumbling for a fastener. The J shape wraps the pipe and holds it firm to the framing, taking the sag out of a long horizontal run and the stress off the fittings at each end. Because the body is high-impact plastic rather than metal strap, it insulates the pipe from the wood — no galvanic corrosion against copper, and the water hammer that telegraphs through a rigid metal clip gets absorbed instead. It fits any CTS-sized line, so the same box handles PEX, copper, and CPVC on the same rough-in. A hundred to the box, which is about one bathroom and a laundry.\u003c\/p\u003e","brand":"DN Group Inc.","offers":[{"title":"100 Pack","offer_id":42274113683550,"sku":"601901-PJC","price":8.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/ChatGPTImageFeb2_2026_06_03_49PM.png?v=1770073442"},{"product_id":"copper-crimp-ring","title":"1\/2″ Copper PEX Crimp Rings — 100-Pack, ASTM F1807 Annealed","description":"\u003cp\u003eA PEX joint is only as good as the ring squeezed around it. Slide one of these over the tubing, seat the fitting, and one full compression of the crimp jaw deforms the copper permanently into the barb — a mechanical seal that doesn't loosen, back off, or need retightening a decade later. The copper is dead-soft annealed, so it yields evenly under the tool instead of springing back, and the spot stop on the ring keeps it from sliding past the fitting shoulder while you set the jaw. These are 1\/2″ rings made to ASTM F1807, the same standard as the crimp fittings they close on — brass tees, elbows, couplings, valves, and stops all take the same ring. A hundred to the bag, because nobody crimps just one.\u003c\/p\u003e","brand":"DN Group Inc.","offers":[{"title":"100 Pack","offer_id":42462397661278,"sku":"7100-104","price":34.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/ChatGPT_Image_Dec_12_2025_06_11_16_PM.png?v=1765581151"},{"product_id":"1-2-inch-pex-cinch-clamps-304-stainless-steel-crimp-rings","title":"1\/2″ PEX Cinch Clamps — 100-Pack, 304 Stainless Steel","description":"\u003cp\u003eThere are two ways to close an F1807 barb, and the cinch clamp is the one that fits where a crimp jaw won't. Instead of a full-circle ring squeezed by a two-handed tool, this is a stainless band with a raised ear: hook the cinch tool over the ear, squeeze once, and the band draws down tight around the fitting. The tool head is small enough to work in a joist bay or against a stud where there's no room to swing a crimper. The band is 304 stainless, so it doesn't corrode in a damp crawlspace or react against copper, and the ear collapses under the tool rather than deforming the band, which keeps the compression even all the way around. It seals 1\/2″ SDR9 tubing — PEX-A, PEX-B, and PE-RT — onto the same brass barbs a copper ring would close. A hundred to the bag, and a go\/no-go gauge check on every one.\u003c\/p\u003e","brand":"DN Group Inc.","offers":[{"title":"Default Title","offer_id":42533934923870,"sku":"6100-104","price":34.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0605\/0073\/8142\/files\/Gemini_Generated_Image_g83s78g83s78g83s.png?v=1773428921"}],"url":"https:\/\/gdbuildingsupply.com\/collections\/pex-rings-clamps-supports.oembed","provider":"Good Day Building Supply Inc.","version":"1.0","type":"link"}