
Foil-Faced, Quieting, Cushioning
The Tegra Pro 2 mm Laminate Underlayment lays a quieter, flatter bed under floating laminate and engineered floors. The closed-cell foam smooths minor subfloor irregularities and softens the step underfoot, while the foil face forms a moisture/vapour barrier when the seams are sealed with aluminum tape — not just overlapped. The 42-inch roll unrolls fast, trims clean with a utility knife, and covers about 300 sq ft per roll, so a typical room goes down with fewer seams and less waste. Lay it foil-side up with edges butted and taped, anchoring the perimeter as needed. Over concrete, add a 6-mil poly vapour barrier beneath it if your flooring brand calls for one — and never stack it under pad-attached planks, which can void the floor's warranty. Built for laminate and engineered-wood installs across Scarborough and the wider GTA.
Features
- Correct thickness for laminate — 2 mm foam cushions the step and smooths minor subfloor irregularities
- Moisture defence — the foil face forms a vapour/moisture barrier when seams are taped (not overlapped) with aluminum tape
- Quieter rooms — reduces footfall noise and the hollow sound common to floating laminate
- 42-inch roll — covers about 300 sq ft per roll for easy planning and fewer seams
- Use the right stack — over concrete, add a 6-mil poly vapour barrier beneath if your flooring brand requires it; never add underlayment beneath pad-attached planks (can void warranties)
Specifications
- Dimension: {"value":42.0,"unit":"in"}
- Type: Foam underlayment for floating laminate and engineered wood
- Thickness: 2 mm (residential laminate standard)
- Face: Aluminum-foil film (tape seams to form the barrier)
- Roll Width: 42" (3.5 ft)
- Coverage: approx. 300 sq ft per roll (approx. 3.5 ft × 86 ft)
- Installation: Float; lay foil face up, edges butted and taped; anchor perimeter as needed
- Compatibility: Do not add beneath pad-attached laminate planks; follow your flooring brand's instructions