LESSO ABS P-Trap with Cleanout — 1½" Hub × Hub DWV, cUPC Certified
LESSO ABS P-Trap with Cleanout — 1½" Hub × Hub DWV, cUPC Certified
Actual product specifications and colors may differ from the images displayed.
Couldn't load pickup availability
Pickup available at GD KennedyUsually ready in 2 hours
View store information
-
Local delivery available for orders over $500
-
Eligible for shipping
Clear the Clog, Keep the Seal
ABS P-trap with a cleanout plug for the under-sink drain that holds a water seal against sewer gas and opens for service without pulling the trap apart — the U-bend keeps a plug of water in the curve that blocks odours from rising back through the fixture, and the threaded cleanout at the base lets you clear a clog or retrieve a dropped ring without cutting pipe. The swivel design eases alignment to the wall outlet before the joints set. Both ends are hub sockets sized for Schedule 40 IPS ABS, solvent-welded for a rigid, sealed joint. It's a LESSO America ABS DWV fitting conforming to ASTM D2661 and CSA B181.1 with NSF/ANSI 14 and cUPC listings — the marks an inspector checks on a residential or light-commercial rough-in across the GTA. Stocked in 1½" for standard sink and lavatory drains. DWV service only; test hydrostatically, never with compressed air or gas.
Features
- Cleanout plug — threaded base access clears a clog or retrieves a dropped ring without cutting pipe
- Sewer-gas seal — the U-bend holds a water plug that blocks odours from rising through the fixture
- Swivel alignment — rotate to line up with the wall outlet before the joints set
- Hub × hub sockets — solvent-welds to Schedule 40 IPS ABS for a rigid, sealed joint
- LESSO America ABS DWV — conforms to ASTM D2661 and CSA B181.1
- cUPC + NSF/ANSI 14 listed — the marks inspectors check on a rough-in
- DWV service only — not for pressure; test hydrostatically, never with compressed air or gas
Specifications
- Fitting Type: P-Trap with Cleanout
- Configuration: U-bend with threaded cleanout, swivel alignment
- Connection: Hub × Hub
- Material: ABS (acrylonitrile butadiene styrene)
- System: DWV (drain, waste, vent), non-pressurized
- Pipe Compatibility: Schedule 40 IPS ABS
- Size: 1-1/2"
- Joining Method: Solvent cement (ABS)
- Certifications: cUPC, NSF/ANSI 14, ASTM D2661, CSA B181.1
- Service Temperature: -40°F to 180°F (typical ABS DWV)
- Colour: Black
Warranty Information
