
Lay, protect, lift—flawlessly.
Meet the job-site essential that behaves like a couture runner: a breathable, waterproof, anti-slip protection mat with a self-adhesive backing that stays put while you work—no tape needed for overlaps. Roll it out over floors, stairs, counters, and fixtures for a clean, cushioned barrier against scuffs, paint, and grit; then lift and reuse. Coverage is about 300 sq ft per roll with a ~40″ working width, ideal for long, uninterrupted runs. Step up to a “Pro”-grade variant for extra-heavy duty or added absorbency when needed.
Features
- Breathable, waterproof, anti-slip construction with self-adhesive backing; designed to protect finished surfaces and stay in place during use.
- It is reusable, and no tape is needed for overlaps. It speeds up installation and reduces waste/cost.
- Multi-surface use: floors, stairs, countertops, furniture, plumbing fixtures & more.
- Approx. 300 sq ft coverage/roll; ~40″ width—ideal for long corridors and room runs.
- Job-site ready guidance: turn off radiant floor heat; overlap 4″ (10 cm); ambient 50–86 °F (10–30 °C); humidity <60%.
- Care limits: It is not recommended for cement/concrete (possible residue/adhesion issues). Do not leave unfinished surfaces down for more than 60 days. (We recommend removing finished surfaces within ~45 days to minimize residue risk.)
Specifications
- Dimension: {"value":49.0,"unit":"in"}
- Type: Temporary, breathable, waterproof surface & floor protection mat (self-adhesive, anti-slip).
- Roll width: ≈39.5″; Coverage: ≈300 sq ft/roll.
- Overlap: 4″ (10 cm) recommended.
- Removal window: ≤60 days on unfinished surfaces; avoid direct prolonged sun exposure.
- Installation environment: 50–86 °F (10–30 °C); RH <60%; surfaces dry and clean.
- Heating: Turn off floor heating before/during use.
- Best practice: Tape only the starting/ending edges; avoid leaving heavy point loads >24 hrs.